你现在的位置:首页>Betway动态>

Betwaybetway的注意事项分析

浏览:
1.由于Betway密封胶的固化需要一定时间,因此,已涂了Betway密封胶的玻璃应水平轻轻搬动。
1. As the curing of two-component sealant takes a certain time, the glass coated with two-component sealant should be moved horizontally and gently.
2.a组、b组份胶应保持清洁,严防异物进入胶中。
2. The glue of group A and group B should be kept clean to prevent foreign matters from entering the glue.
3.
3. In the process of continuous operation, the stopping time of the glue gun should not exceed 20 minutes, otherwise, the hollow two-component glue machine should use component a glue to punch out all the mixed glue until the single component a glue is discharged from the muzzle of the gun.
4.高压胶管不得---挤压、弯曲,防止影响系统正常工作。
4. High pressure hose shall not be squeezed or bent to prevent affecting the normal operation of the system.
5.混胶器应经常保持畅通,以良好的出胶效果。如遇堵塞情况,可用---浸泡后清洗。建议每5组清洗一次。
5. The mixer should always be kept smooth to achieve good dispensing effect. In case of blockage, it can be cleaned after soaking. It is recommended to clean every 5 groups.
6.当胶枪长时间不用时(超过一周),应拆下枪体使用溶剂将胶枪和混胶器内的残留胶体清洗干净。
6. When the glue gun is not used for a long time (more than one week), the gun body should be removed and the residual colloid in the glue gun and mixer should be cleaned with solvent.
7.不同Betway胶下载厂家所下载的胶内含杂质数量不同,根据实际情况清晰b组分的过滤网及单向止回阀 Betwaybetway胶枪,建议每两组清洗一次。
7. The amount of impurities in the glue produced by different two-component glue manufacturers is different. According to the actual situation, it is recommended to clean the filter screen of component B and the glue gun of one-way check valve two-component glue machine every two groups.
8.任何因胶体固化所造成的胶枪、管路或整机的故障 Betwaybetway配件,一律不在保修范围之内。
8. Any failure of glue gun, pipeline or the whole machine caused by colloid curing is not included in the warranty.
9.定期给各泵的加油口加油,应油雾器内不断油。
9. Oil the oil inlet of each pump regularly, and keep the oil in the oil mist.

上一篇:旋转轴自动betway可以提升圆形betway效果吗?
下一篇:平时应该如何保养Betway下载线

  • 官方微信
乐博棋牌英国威廉希尔中文网站英国威廉希尔中文网站